about

Request a Sample

[email protected]

Frequently

Asked Questions
  1. Q1: Can I have a sample for testing?
    A: Yes, you can, but you need to pay.
  2. Q2: Can I add my logo on the clothing?
    A: Yes, OEM and ODM are available.
  3. Q3: Do you have inspection procedures for the products?
    A: 100% self-inspection before packing.
  4. Q4: Can I have a visit to your factory before the order?
    A: Sure, your visit is welcome at any time.
  5. Q5: How can I get after-service?
    A: We assure 2 years warranty. During this period, If any product quality issues occur, spare parts will be sent for free. But we have to charge if the problem is caused by man-made factors.

Statistical analysis of cyclic performance of fire resistant

Development and Evaluation of Performance Tests to

Development and Evaluation of Performance Tests to Enhance ... Data Analysis. Results from cyclic fatigue fracture testing and static testing are being analyzed to develop a ... Development and Evaluation of Performance Tests to Enhance Superpave Mix Design and Implementation in Idaho ...

PEER Reports Pacific Earthquake Engineering Research Center

PEER 2010/110 - Seismic Performance Assessment and Probabilistic Repair Cost Analysis of Precast Concrete Cladding Systems for Multistory Buildings Jeffrey P. Hunt, Bozidar Stojadinovic - Report PEER 2010/109 - Report of the Seventh Joint Planning Meeting of NEES/E-Defense Collaboration on Earthquake Engineering.

Fatigue (material) - Wikipedia

Analysis of fatigue data requires techniques from statistics, especially survival analysis and linear regression. The progression of the S-N curve can be influenced by many factors such as stress ratio (mean stress), loading frequency, temperature , corrosion , residual stresses, and

Nonlinear Structural Analysis For Seismic Design

concrete structures, nonlinear structural analysis, and performance- ... He has special expertise in seismic resistant design and the modeling of structures for nonlinear analysis. Finley A. Charney, Ph.D., P.E., is an Associate Professor in the ... and Fire Research Laboratory (BFRL). Dr.

Statistical fatigue strength evaluation and inelastic ...

All of these results allowed us to assess the cyclic fatigue life distribution for each stress level. 2.8. Life estimation method. Evaluations of the scattering for both bending strength and fatigue life were carried out according to Weibull distribution analysis derived from the minimum distribution of the statistics of extremes. The two-parameter and three-parameter Weibull distributions are given in Eqs.

Fact Sheet: Assessing Risks from Flame Retardants ...

Cyclic Aliphatic Bromides cluster. The cluster has been used as a flame retardant in extruded and expanded polystyrene foams (EPS/XPS), polystyrene (PS) products, textiles, paints and coatings. The cluster has been used as a flame retardant in extruded and expanded polystyrene foams (EPS/XPS), polystyrene (PS) products, textiles, paints and coatings.

Fire Resistance Design of Unprotected Concrete Filled ...

This paper assesses the statistical confidence in available fire resistance design models/approaches that are used in North America and Europe by performing a meta-analysis which compares the available experimental data from large-scale standard fire tests performed around the world against fire resistance predictions from design codes.

PERFORMANCE TESTING - Industries

IL provides performance testing of the building envelope to determine the rate of air infiltration, water penetration, structural, impact and cyclic performance.

Bolt Science - List of References

A Theoretical Model To Study Thread Loosening A Tough Corrosion Resistant Coating For Marine Components A Way With Nuts ... Cyclic Analysis Of Steel Bolted Components ... Statistical Analysis Of Asperities On A Rough Surface

Comparison of the Cyclic Fatigue Resistance of Reciproc ...

Conclusion: The Reciproc Blue instruments showed higher cyclic fatigue resistance than the Reciproc instru-ments in both single and double canal curvatures. Keywords: Cyclic fatigue resistance, endodontics, reciproc, reciproc blue INTRODUCTION The use of nickel-titanium (Ni-Ti) in end-odontic instruments has opened a new era in endodontics.

Symposium Volumes - American Concrete Institute

Symposium Volumes. Practice-oriented papers written by individuals with real-world experience. Often focusing on practical applications, innovation, and niche topics, ACI symposium volumes include papers presented at ACI conventions, papers submitted as part of ACI convention sessions, and other papers approved by the sponsoring committee.

Theoretical Analysis of Light-Weight Truss Construction in ...

Theoretical Analysis of Light-Weight Truss Construction in Fire Conditions, Including the Use of Fire Retardant Treated Wood by Gilead Ziemba A Thesis Submitted to the Faculty ... Fire statistics suggest that there is an urgent need for improved performance of

Influence of Continuous or Reciprocating Optimum Torque ...

P<0.0001). Post-hoc analysis revealed a significantly higher cy - clic fatigue resistance of F6 SkyTaper compared to OneShape in both motions (P<0.0001). The significant interaction in the statistical analysis suggested that both of the variables (type of motion and instrument) had a relevant impact on the cyclic fatigue resistance.

Ultralight and fire-resistant ceramic nanofibrous aerogels ...

The resulting CNFAs exhibit the integrated properties of flyweight densities of >0.15 mg cm3, rapid recovery from 80% strain, zero Poissons ratio, and temperature-invariant superelasticity to 1100°C. The integral ceramic nature also provided the CNFAs with robust

Performance Comparison of a Pretied Suture Knot With Three ...

abrasion-resistant suture if the knot construct is in close ... Statistical Analysis One-way, unstacked analyses of variance were used to compare the different test groups for loop elonga- ... Performance Comparison of a Pretied Suture Knot With Three Conventional Arthroscopic Knots

Flame Resistant Materials - Pennsylvania State University

Thermal Analysis In general, poly[bis(p-R-phenoxy)phosphazenes], where R is a polar substituent, give high char yields of 50% or more at temperatures at or above 700 °C and also undergo a high degree of cross-linking to form a dense ultrastructure.

Medium Density Fibreboard (MDF) WoodSolutions

Medium Density Fibreboard (MDF) is a reconstituted wood panel product. It is a dry-processed fibreboard manufactured from wood fibres, as opposed to veneers or particles, and is denser than plywood and particleboard.

TECHNICAL INFORMATION SHEET - Oriented Strand Board

Four grades of OSB are defined in EN 300 in terms of their mechanical performance and relative resistance to moisture. These are: OSB/1 - General purpose boards and boards for interior fitments (including furniture) for use in dry conditions.

Performance Evaluation of Modern Building Thermal

cyclic performance of the construction, which is significant when the outdoor temperature is cycling below and above the desired indoor temperature. Materials with beneficial thermal properties are either

WSDOT - Pavement Research

Pavement research is conducted to keep current with pavement issues in the areas of asphalt, concrete, pavement construction, pavement evaluation, pavement smoothness, and traffic.

EVALUATION OF MASONRY WALL PERFORMANCE UNDER

Statistical analyses were performed to evaluate the performance of each wall type failing in flexure or shear. Theoretical predictions of performance were compared to experimental results for walls failing

Dicyclopentadiene (DCPD) Market - Global Industry Analysis ...

Manufacturing of cyclic olefin polymers (COP) and cyclic olefin copolymers (COC) necessitates highly pure grade of DCPD for use in in applications such as optical disks, high-density electronic storage media, high-quality lenses, and high-performance films.

Section Analysis and Cyclic Behavior of Post-Tensioned ...

Journal of Earthquake Engineering, 5(3): 329 367. [Taylor & Francis Online] , [Web of Science ®] [Google Scholar] ], (b) Moment-rotation procedure, for jointed

Flame retardant - Wikipedia

Advocates for the flame retardant industry, such as the American Chemistry Councils North American Flame Retardant Alliance, cite a study from the National Bureau of Standards indicating that a room filled with flame-retarded products (a polyurethane foam-padded chair and several other objects, including cabinetry and electronics) offered a 15-fold greater time window for occupants to escape the room

Cyclic performance of cold-formed steel shear walls ...

To satisfy the requirements of fire resistance and loading capacity of the walls in multi-story cold-formed steel (CFS) structures, shear walls sheathed with double-layer wallboards on

Nonlinear Numerical Analyses of a Fabricated Connection of ...

In the last thirty years, concrete-filled steel tubular (CFST) columns were widely employed as compression materials in high-rise buildings, long-span bridges, and underground structures due to the advantages of good performance, construction convenience, fine fire resistance as well as low construction cost [1 D. Martin, O. Shear, and Q ...

Cyclic Fatigue Resistance of Novel Rotary Files ...

Aims: The aim of this in vitro study was to compare the static cyclic fatigue resistance of thermal treated rotary files with a conventional nickel-titanium (NiTi) rotary file.